PRODUCTS

PRODUCTS

Products

D series reducer

D series reducer

D series vertical shaft reducer is produced according to the national standard (JB/T9002-1999), which is used for the transmission device whose input shaft and output shaft are arranged in vertical direction.

Classification:

Hardened Cylindrical Gear Reducers

Key words:

D series reducer

Product Description

D series vertical shaft reducer is produced according to the national standard (JB/T9002-1999), which is used for the transmission device whose input shaft and output shaft are arranged in vertical direction. It mainly consists of three series: DBY (two-stage), DCY (three-stage) and DFY (four-stage).

Performance characteristics.

1, center distance, nominal transmission ratio and other main parameters are optimized design, the main parts and components of good interchangeability;

2, gears are made of high quality alloy steel by carburizing and quenching, tooth surface hardness HRC58-62, tooth core hardness HRC30-42;

3、Small size, light weight, high precision, large carrying capacity, high efficiency, long life, high reliability, smooth transmission, low noise;

4, generally use oil pool splash lubrication, natural cooling, when the thermal power can not meet, can be used to circulate oil lubrication or fan, coil water cooling and other cooling methods.

Application scope

1、Input speed: n≤1500r/min;.

2、Gear drive circumferential speed is not more than 20 meters/second.

3、Operating environment -40~50℃. If it is lower than 0℃, the lubricating oil should be preheated to above 0℃ before starting, this reducer can be used for both forward and reverse direction operation;

4, can be used in metallurgy, mining, chemical industry, building materials, lifting, transportation, textile, papermaking, instruments, plastics, rubber, engineering machinery, energy and other industrial sectors of mechanical equipment deceleration applications.

online message


NE type plate chain bucket elevator is a commonly used vertical conveying equipment for vertical conveying powder, granular and lump materials, also can convey abrasive materials, such as cement, sand, earth coal, ceramic sand, etc., the temperature of the material is generally below 250 ℃, the lifting height of up to 50 meters.


This screw conveyor (hereinafter referred to as conveyor) is suitable for conveying various powdery and small lumpy materials, such as coal powder, flour, cement, sand, grain, small lumps of coal, etc., both horizontally and at an angle of inclination of less than 20°.


The compartmentalized pulse bag filter is a new type of high-efficiency environmental protection equipment developed and designed by our factory on the basis of summarizing the advantages of similar products at home and abroad and applying the world's advanced technology.