PRODUCTS

PRODUCTS

Products

Z series reducer

Z series reducer

Z series parallel shaft reducer is produced according to the national standard (GB19004-88), the product has been optimized design, with contemporary international advanced level, it mainly includes ZDY (single-stage), ZLY (two-stage), ZSY (three-stage) and ZFY (four-stage) four series.

Classification:

Hardened Cylindrical Gear Reducers

Key words:

Z series reducer

Product Description

Z series parallel shaft reducer is produced according to the national standard (GB19004-88), the product has been optimized design, with contemporary international advanced level, it mainly includes ZDY (single-stage), ZLY (two-stage), ZSY (three-stage) and ZFY (four-stage) four series.

Performance characteristics.

1, center distance, nominal transmission ratio and other main parameters are optimized design, the main parts and components interchangeability;

2, gears are made of high-quality alloy steel by carburizing, quenching, tooth surface hardness of HRC58-62, tooth core hardness HRC30-42;

3、Small size, light weight, high precision, large carrying capacity, high efficiency, long life, high reliability, smooth transmission, low noise;

4, generally use oil pool splash lubrication, natural cooling, when the thermal power can not be met, can be used to circulate oil lubrication or fan, cooling coils, such as air-cooled, water-cooled and so on.

Technical parameters.

1、Input speed: n≤1500r/min.

2、Gear drive circumferential speed is not more than 20 meters/second.

3、Working environment -40~50℃, if it is lower than 0℃, the lubricating oil should be preheated to more than 0℃ before starting, this reducer can be used for forward and reverse direction operation;

4、It can be widely used in metallurgy, mining, chemical industry, building materials, lifting, transportation, textile, papermaking, instruments, plastics, rubber, engineering machinery, energy and other industrial sectors.

online message


NE type plate chain bucket elevator is a commonly used vertical conveying equipment for vertical conveying powder, granular and lump materials, also can convey abrasive materials, such as cement, sand, earth coal, ceramic sand, etc., the temperature of the material is generally below 250 ℃, the lifting height of up to 50 meters.


This screw conveyor (hereinafter referred to as conveyor) is suitable for conveying various powdery and small lumpy materials, such as coal powder, flour, cement, sand, grain, small lumps of coal, etc., both horizontally and at an angle of inclination of less than 20°.


The compartmentalized pulse bag filter is a new type of high-efficiency environmental protection equipment developed and designed by our factory on the basis of summarizing the advantages of similar products at home and abroad and applying the world's advanced technology.